Register Now


Lost Password

Lost your password? Please enter your email address. You will receive a link and will create a new password via email.

Can I use a programmable thermostat with baseboard heaters?

Rate this Question and Answer
Asked By: Keyla Lindeman | Last Updated: 5th January, 2020
Baseboard heaters are a very efficient type of heater which can be made even more efficient by using electric programmable thermostats. Programmable thermostats can actually be treated like an investment because they will help your heating system to save lots of energy.

Just so, do smart thermostats work with baseboard heaters?

The Honeywell Lyric, Nest and other smart thermostats are designed to work with central home heating systems. Electric baseboard and fan heaters work with line-voltage thermostats, which can be either 120 or 240 volts. If you hooked up a low-voltage thermostat directly to one of our heaters it would fry the thermostat.

Similarly, does ecobee work with baseboard heaters? Unfortunately, No. The reality is: Virtually all smart thermostat manufacturers advise against installing Nest and Ecobee thermostats with electric baseboard heating. Why? Simply put, they are not compatible.

Also to know, what type of thermostat is typically used with electric baseboard heaters?

line voltage thermostat

How do you change a thermostat on a baseboard heater?

How to Replace an Electric Baseboard Heater Thermostat

  1. Step 1: Switch Off Power to Electrical Circuit. Start off by powering off the circuit.
  2. Step 2: Ensure that no Voltage Flows in the Circuit.
  3. Step 3: Disconnect Wires.
  4. Step 4: Test the New Thermostat.
  5. Step 5: Reconnect Wires.
  6. Step 6: Attach Thermostat.
  7. Step 7: Test that Everything is Working Fine.

What is the best thermostat for electric baseboard heat?

  • Honeywell Home 5-2-Day Baseboard Programmable Thermostat.
  • Cadet 7-Day Double-Pole 208/240-Volt Electronic Programmable Thermostat.
  • Cadet Smart-Base 240-Volt 5-1-1 Programmable 4 Events/Day Baseboard Thermostat in White.
  • Stelpro KI Z-Wave 7-Day Programmable Wall Thermostat for Electric Baseboard and Convectors in White.

Can nest be used with electric heat?

There are a lot of homes that have electric heating only, but the Nest Learning Thermostat isn’t designed to control these and is built to work with hot water systems only. Thanks to this device, it’s possible to get your Nest to control an electric radiator, or an entire electric heating system.

How do you control baseboard heaters?

How to Adjust Baseboard Heaters
  1. Locate the end-cap covers on the heater on the end of the heater where the water in-let pipe mounts.
  2. Locate the water flow control valve under the end-cap.
  3. Turn the clockwise to increase the flow of water or counterclockwise to decrease the flow of water.

What voltage are baseboard heaters?

240 volts

Are new baseboard heaters more efficient?

They use a series of resistances to make some heat that it heats the air through convention, then the air will heat the whole room. New baseboard heaters can be more efficient at the passage of hot air. That’s why the replacement of a new baseboard heater is not going to save you energy.

How do you control electric heat?

Here are seven ways those of us with baseboard heating can save some cash:
  1. Keep your heater sparkly clean. Dust buildup on your baseboard heater will block the heat and keep it from escaping properly.
  2. Turn it down!
  3. Calibrate.
  4. Insulate.
  5. Contact the power company.
  6. Run appliances at night.
  7. Give your ceiling fan a whirl.

How do you convert a low voltage thermostat to High Voltage?

You replace the line voltage thermostat with the switching relay, then add low voltage wire from a transformer to power the Nest or other lowvoltage thermostat. Wires from the low voltage thermostat simply run to and turn on or off the switching relay.

How do I test my baseboard heater thermostat?

Disconnect wires, and remove thermostat.

Turn thermostat dial to highest (hottest) setting. Set multimeter to test continuity. Touch one probe to a HOT wire lead and the other to each UNIT wire. The tester should indicate continuity in one of the connections.

Will any thermostat work in my home?

You’ll need to get a thermostat that is compatible with your system’s voltage requirements. Most thermostats work with low voltage systems. And the good news is, unless you have wall/floor heaters or an electric baseboard heating system, you most likely have a low voltage system because they are the most common.

How does a baseboard heater thermostat work?

The thermostat works by sensing the temperature of the room and controlling the amount of current that passes through the wires to the heater. Most baseboard heating systems use 240-volt circuits, but 120-volt heaters are also available; they are often used to provide supplemental heat in individual rooms.

What is the formula to figure out how much electric heat is produced by an electric furnace?

Multiply the square footage of the room by the estimated 10 watts of electric heat required to heat each square foot. For example, a 12- by 12-foot room measures 144 square feet. Multiplying this by 10 reveals that a 1,440-watt heater is required to heat the space.

When should I replace furnace thermostat?

Generally, it’s a good idea to replace your thermostat roughly as often as you replace your climate control systems. So, every time you replace your air conditioner or heater, you should be installing a new thermostat as well.

Which location is the best for installing electric baseboard heaters?

Fan heaters work best on an inside wall; baseboard are best under a window. (But you can install fan heaters on outside walls and baseboards on inside walls.) If you’re installing a heater by a door, make sure the heater isn’t blocked by the door when it is open.

Can I use a programmable thermostat for boiler?

Firing a mid efficiency boiler with a programmable thermostat does not change the fact that the boiler is still mid efficient. Firing a high efficiency boiler to high temperatures with a programmable thermostats does not change the fact that the boiler is behaving like a mid efficient appliance.

How do I change my electric heat thermostat?

How to Wire a Replacement Electric Heat Thermostat
  1. Step 1 – Turn Off Power. Turn off power source to your electric heat thermostat.
  2. Step 2 – Install Thermostat. Install the electric heater thermostat.
  3. Step 3 – Connect Line. Connect line connection to the electric heater thermostat.
  4. Step 4 – Connect Load.
  5. Step 5 – Mount Thermostat.
  6. Step 6 – Test Thermostat.

Can I change my thermostat to digital?

Digital thermostats allow you to set schedules and change the temperature over the internet, which can make keeping your house comfortable easy! It’s surprisingly simple to swap your old analog thermostat with a digital one.

Is it easy to change a thermostat?

Before replacing a thermostat, shut off the power to your thermostat at the breaker box. Remove the old thermostat from the wall and make notes on how all of the wiring was attached so you can easily rewire the new unit. Install the replacement wall plate and hook the new thermostat up to the old wires.

  • 12
  • 39
  • 39
  • 39
  • 24
  • 11
  • 21
  • 32
  • 31
  • 36