Register Now

Login

Lost Password

Lost your password? Please enter your email address. You will receive a link and will create a new password via email.

How do I reset my Zmodo greet pro doorbell?

Rate this Question and Answer
Asked By: Ayram Chaikowsk | Last Updated: 26th April, 2020
1) You may have entered your WiFi password incorrectly. Please reset your device by pressing and holding the reset pin on the bottom of the Greet until the LED ring turns off. Wait for it to power back on, and retry the setup process once the LED ring is blinking green.





In respect to this, where is reset button on Zmodo greet?

There is no reset button on Zmodo Greet Select doorbell. In most cases, there is no need to reset the doorbell. If you need to install it in a different WiFi or with a different account, you just need to delete it from the original account. This way, the device is unbind and ready to be set up again.

Also Know, why does my Zmodo camera keep going offline? One or More of My NVR Cameras Have Gone Offline. Usually, this problem would be generated due to a Wi-Fi signal interruption on this particular camera. There might be a conflict with the Wi-Fi IP Address assigned to that camera, or simply that the router has stopped detecting it.

Hereof, why wont my Zmodo connect?

If you have a Zmodo camera that won’t connect to Wi-Fi there’s a quick fix. Usually the issue with Internet connection is related to the frequency the camera is operating at. When your router works at 2.4Ghz and 5Ghz, the Zmodo camera can associate itself to the wrong SSID (wireless signal name).

How do I reset my Zmodo camera?

1) You may have entered your WiFi password incorrectly. Please reset your device by pressing and holding the reset pin on the bottom of the Greet until the LED ring turns off. Wait for it to power back on, and retry the setup process once the LED ring is blinking green.

Why is my Zmodo camera flashing green?

-If the Status Light is blinking green, try removing special characters and spaces from the SSID (WiFi network name) like “$” or “!”. -If the Status Light is solid blue, then the device has already connected to the WiFi network.

What is Zink connection?

Many Zmodo devices use the “Zinkconnection method to quickly and easily set up your device. In order to determine if your device can be connected using the “Zinkconnection method, please power on your device and wait for the status light on your device to turn blinking green.

What is Zmodo beam?

Beam boosts wireless signal up to 200m (656ft) and 300Mbps. Beam acts as a Zmodo smart home hub, allowing you to connect Zmodo accessories such as door and window sensors and receive alerts on your phone when something is triggered.

How do I reset my Zmodo mini WiFi camera?

This can be done by pressing the reset button located in one of the splits that comes out of that camera. Press and hold the small white button in this split for about 15-20 seconds, and start the process all over!

How do I set up my Zmodo camera?

Connect your Android or iOS smartphone to the WiFi network that you want to connect to your Zmodo wireless device (must be 2.4GHz). 2) Download the free app and create a free account. Download and open the free ‘Zmodo‘ app from Google Play or the App Store and sign up for a free Zmodo account.

How do I change the wifi on my Zmodo camera?

To move your camera to a different Wi-Fi network:

Plug your camera into a power source in the new location, launch the MeShare app from your smartphone, and login with your existing username. Add the device again using the same setup process as before, but inputting the new network name and password.

What is network SSID?

Share the Article: Disabling the wireless network name (SSID) is an added security feature of the Linksys router. You can connect your wireless devices by adding the network on your smartphone network list. wireless network name (SSID) wireless security key or passphrase.

How do you install a wireless doorbell video?

How to install the Ring Video Doorbell 2
  1. Step 1: Charge and install the included battery.
  2. Step 2: Download the Ring app on your phone.
  3. Step 3: Install the battery and complete the app setup.
  4. Step 4: Turn off power to your current doorbell.
  5. Step 5: Prep the wall for installation.
  6. Step 6: Attach the doorbell wires.

How do I install UBell?

Open the UBell APP, Goes to “Add a device” —-“’Setup device”. 6. Power on the doorbell, press “Yes” when you’ve heard the doorbell say “The camera is now ready to begin pairing”, then the LED indicator on the doorbell will be blue and blinking.

How does Zmodo work?

For one thing, they offer exceptional home security monitoring and surveillance at a very low price. You simply pay for the cost of the equipment and then monitor the cameras yourself via a smartphone or app or internet portal. Zmodo has expanded its offerings and now includes more smart home devices and options.

How do I remove a device from Zmodo?

In the Zmodo app, you can delete a device from your account by pressing and holding on its thumbnail on the home page. A pop up will appear asking if you are sure you wish to delete the device. Press “Ok” to go through with the deletion. You can also delete a device via the Zmodo web app.

How do I contact Zmodo?

Need help?
  1. Live chat with us.
  2. Write us an email. For sales: [email protected] For general issues: [email protected]
  3. Call our support line. 217-903-5037. Hours: Mon – Fri 8AM – 8PM CST.

Can Zmodo be hacked?

Hello, there, there’s no way that your IP cameras can be hacked if they are not connected to the Internet. So if you don’t connect the recorder to the router, there will be NO hacking issues.

How do I find the IP address of my Zmodo camera?

Open Internet Explorer and access the camera by it’s ip address. Be sure to enable compatibility view prior to logging in. Click on the settings and check that the IP addresses match on the network and wifi tabs and then enter your wifi password for your network.

How do I log into my Zmodo camera?

You can view your camera online through our web app at user.zmodo.com. Just log in using your the same account credentials that you use to log into the mobile app in order to view and control your devices through your computer’s web browser.

How do I access my wireless router settings?

Introduction
  1. Open a web browser such as Internet Explorer.
  2. Go to the Address bar and enter the IP Address of your router then press Enter. For example, 192.168.
  3. A new window prompts for a User name and Password. Type admin for User name and Password, since admin is the default user name password, and then click OK.

How do I connect my ion camera to my phone?

How do I connect to the camera using the iOS App?
  1. Search for the iontheaction App at the App store.
  2. Download and install the ION App to your mobile device.
  3. Turn on the camera and WiFi PODZ.
  4. When the WiFi LED changes to a slow blue flash, go to the network settings of your mobile device and choose WiFi.
  5. Enter password “123456789” to connect to your camera.

  • 12
  • 39
  • 39
  • 39
  • 24
  • 37
  • 23
  • 33
  • 38
  • 38