Register Now


Lost Password

Lost your password? Please enter your email address. You will receive a link and will create a new password via email.

How do I turn off the chime on my Honeywell alarm?

Rate this Question and Answer

How do I turn off the chime on my Honeywell alarm?

Asked By: Nanuli Borderia | Last Updated: 6th June, 2020

How do I turn off the chime on my Honeywell alarm?

How to turn the Chime mode off on your Honeywell alarm system:
  1. Key in your four-digit security code.
  2. Press 9 (CHIME).
  3. The Chime message will be removed from the screen.

Also, how do I turn off the chime on my alarm?

Choose Settings > Advanced Settings > enter the Installer Code (default 1111) > Sound. Then scroll down to Chime Settings. Uncheck the box next to “All Chimes“. This will disable the chimes for the system.

One may also ask, how do you disconnect an alarm system? You can turn off or power down your home alarm system by disconnecting its backup battery and then unplugging the transformer for the device from the wall outlet. You can confirm that the panel has been powered down by checking its touchscreen or keypad and making sure that it is blank.

Similarly, it is asked, how do I turn off my alarm without the code?

Access the Main Control Panel of Your Alarm System

  1. Locate the main access panel of your home alarm system.
  2. Remove the AC power to the home alarm console from the wall directly.
  3. Use your console’s access key (or another item such as a small screw) to unlock and open the system’s backing.

What does AC mean on Honeywell alarm?

AC power failure on your security system means that the system is not receiving plug-in power from a wall outlet. To remain powered, the system has switched to its backup battery.

How do I turn off the chime on my Honeywell alarm?

What Does not ready chime mean?

NOT READY: Appears when burglary portion of the system is not ready for arming (due to open protection zones). System is operating on backup battery power. AC: Appears when AC power is present. CHIME: Appears when the CHIME feature is activated.

How do I stop my alarm system from beeping?

How to Stop Your Security Alarm from Beeping
  1. Locate the source of the beeping. The first thing you’ll want to do is to make sure that it’s your security system that is going off and not another alarm system you have in place.
  2. Call your alarm monitoring company.
  3. Check the alarm system battery.
  4. Disarm the alarm system.
  5. If all else fails, call a technician.

How do I turn off the door chime?

How to Disable a Door Chime
  1. Remove the cover from the door chime. The cover is made of plastic and usually has two snaps that are holding it in place.
  2. Locate the two wires that control the chime mechanism. They should be to one side or underneath the chime hammer.
  3. Loosen both of the screws that control the electromagnet.

How do I turn off the low battery chime on my ADT alarm?

For many of our most popular systems, beeping alarms and low battery trouble beeps can be silenced by pressing the [OFF] or [#] buttons from the keypad. If this does not work, please refer to your system user’s manual for specific instructions.

What does alarm chime mean?

A chime refers to an audible tone that a security panel and/or keypad produces when certain types of system zones are activated. The tone will even be produced if the panel is in a disarmed state.

How do I permanently turn off my ADT alarm?

How Do You Stop an ADT Security Alarm After It Goes Off?
  1. Go to your home alarm’s keypad and enter the code you were given that shuts off the alarm. This code is given to you when you first have the alarm installed.
  2. Go to your alarm’s transformer box and remove the battery.
  3. Go to your home’s circuit breaker.
  4. Flip off the switch and your alarm will shut off.

How do I silence my DSC alarm?

  1. Press * and then the 6 button on the keypad.
  2. Enter your master Code.
  3. Use the < and > keys to scroll to “Buzzer Control”
  4. Press *
  5. Use the < and > keys to scroll through the various buzzer settings, and adjust to your preference. “0” will silence the DSC keypad.
  6. Press # to exit.

Why is my home alarm beeping?

Most often this is due to a loose sensor or a faulty battery. Household alarms have a display screen on the main control panel that indicates which sensor is causing the beeping. To fix a house alarm system that keeps beeping sometimes requires bypassing the zone that the sensor is in altogether for a short time.

Why is my DSC alarm beeping?

Battery Trouble

If your DSC home alarm is beeping due to this condition, the main panel battery is low or failing. If you’ve recently had a power outage, wait 24-48 hours after power is restored. The battery can be replaced by your alarm company, if you have one.

Will house alarm go off if battery dies?

Once your battery dies, your alarm is then completely dead the duration of the power outage. Alarm batteries are not built to handle such frequent, long periods of dependency.

How do I reset my alarm system?

How to Reset a Home Alarm System
  1. Check the manufacturer’s website for installer instructions.
  2. Check out do-it-yourself alarm support sites (see References below).
  3. Locate the power source to the Main Control Panel.
  4. Disconnect the backup battery in the Main Control Panel.
  5. Leave power off for a minimum of five minutes.
  6. Reconnect the battery leads.

Will a house alarm work without a battery?

You can now take the original battery with you when you go looking for a replacement. The alarm will still work without it. Keypad operated systems have the facility to enter an engineers code to allow the panel cover to be opened without this happening.

How do I reset my alarm after changing the battery?

Press the “Home” or “Away” button to arm the system, then immediately enter your access code and press “Off.” This action will reset the alarm to illuminate the low-battery signal to the system. The “Low Bat” indicator will go off, and the sensor number will be erased on the keypad of the master console.

How do you reset your house alarm after a power cut?

How to Reset a Home Alarm After a Power Outage
  1. Locate the “System” or “System Status” button on your home alarm keypad.
  2. Wait until the AC power is restored to your home.
  3. Lift the cover of the circuit breaker box and find the breaker that controls your home alarm system.
  4. Replace the backup battery in the home alarm keypad.

How do I adjust the volume on my Honeywell alarm system?

How to Change the Volume on a Honeywell Alarm
  1. Press the “Function” button.
  2. Press the “Volume” button.
  3. To increase volume, press the “3” button.
  4. To decrease volume, press the “6” button.
  5. Repeat steps 1 through 4 to further increase or decrease volume.
  6. Press the “Function” button.
  7. Press the “Volume” button.
  8. Press the “Off” button.

How do I turn off the chime on my Honeywell alarm?

How do I turn off the chime on my Honeywell alarm?

  • 12
  • 39
  • 39
  • 39
  • 24
  • 28
  • 27
  • 37
  • 31
  • 35