Click to see full answer
Considering this, how do you release a cable puller?
How to use a cable puller
- Step 1 – Disengage main ratchet drive. First, locate the drive pawl spring on the lever handle and pull it to the ‘up’ position to disengage the main ratchet drive.
- Step 2 – Attach load hook.
- Step 3 – Release cable.
- Step 4 – Release stop pawl trigger.
- Step 5 – Attach anchor hook.
Likewise, what is the basic purpose of the ratchet release lever on a come along? A come along (also called a wire rope hand ratchet puller) is a manual device that can make moving heavy loads by hand possible. How does it work? A wire rope puller operates very similarly to a lever block except with wire rope instead of chain.
Besides, can you use a come along for lifting?
Come-alongs are not rated for overhead lifting, but a similar looking device called a ratchet lever hoist is used this way. The original tool of this type was developed by Abraham Maasdam of Deep Creek, Colorado about 1919, and later commercialized by his son, Felber Maasdam, about 1946.
How do you use a come along to tighten a fence?
Place the knobbed side of the T-post on the inside of the fence. Unroll the barbed wire along the line of the fence posts. Fasten the wire to one of the corner posts and pull it as tightly as possible to the next corner post. Use a wire stretcher, a mechanical ratchet device, to pull the wire tighter.
- TEKTON 5547 4-Ton Dual Gear Power Puller. The TEKTON 5547. Our top choice for the best come along winch in this review is the Tekton 5547 4-Ton Dual Gear Power Puller.
- Maasdam Pow’R Pull 144S-6. The Maasdam Pow’R Pull 144S-6.
- ABN 2 Ton Single Gear Hand Puller. The ABN 2 Ton Single Gear Hand Puller.
|Rated Line Pull (RLP)||Slope Percent|
|10 percent||60 percent|
|2,000 lbs||10,050 lbs||3,331 lbs|
|2,500 lbs||12,563 lbs.||4,160 lbs.|
|3,000 lbs||15,075 lbs||4,991 lbs|