Register Now

Login

Lost Password

Lost your password? Please enter your email address. You will receive a link and will create a new password via email.

How do you remove plastic wire from copper wire?

Rate this Question and Answer
Asked By: Lucette Tomaev | Last Updated: 29th April, 2020
Boil the water and put the copper wire that you want to strip into it. Allow the wire to sit in the boiling water for 10 minutes. Remove the copper wire from the water while wearing gloves. Hold the wire with one hand, tightly and use your free hand to grip the plastic on the wire, and then start pulling.





Similarly, how do you remove plastic wire from wire?

Peel the plastic sheathing from the wires underneath with a sharp utility knife. Slide your thumb along the underside of the wire while you pull the knife along the top to remove a thin slice of plastic. This technique takes practice.

Additionally, is copper wire worth more stripped? Stripping Copper Wire Copper is one of the most valuable metals at the moment, due to demand for it in electronic devices and major infrastructure projects. The same weight of stripped wire without the PVC insulation is worth three times as much.

Likewise, can you burn plastic off copper wire?

Another means of how to get plastic off copper wire is to use controlled heat to melt the plastic off the wire. If you decide to use heat to strip the copper wire, do not use fire. Burning the wire often damages it and reduces the quality of the copper.

Is burning copper wire illegal?

Legality. In many states it is illegal to burn copper wiring, as it is dangerous and can contaminate the ground. Burning copper wire in these states will result in you being arrested and prosecuted, possibly facing a fine of several hundred dollars.

What is the difference between #1 and #2 insulated wire?

Difference being one is solid core and the other is stranded wire obviously smaller than 16 guage. Would that make the stranded #2 as the strands are smaller than 16 guage? Thanks for the help! #1 Copper is stripped wire that is bigger than a #2 pencil lead.

Where can I find thick copper wire in my house?

Here are some of the best places to find and collect this highly sought-after material.
  • TVs and Monitors.
  • Most electronics have insulated wires inside the metal housing, including laptops, printers, radios, and DVD players.
  • Desktop towers are a great source for scrapped insulated copper wire.
  • Large Appliances.

How do you brighten copper wire?

Add 1 tablespoon (17.06 g) salt and 1 cup (236.58 ml) vinegar to a bowl. Salt and vinegar can help clean off any tarnish or corrosion that remains on your copper wire. Mix the solution together until the salt is well incorporated with the vinegar. Allow the wire to sit in the solution.

Do you have to strip copper wire before recycling?

Not Properly Preparing Your Materials. Scrap yards will never encourage you to strip your copper wire when you bring it in. That’s because they don’t have to pay you as much for the copper wire when it’s not stripped! Get the most out of your copper wire by taking the extra time and stripping it!

How do you strip a section of a wire?

Two ways ;
  1. Use a stripper to cut the insulation and push on it ( both sides ) to compress the insulation to expose bare wire.
  2. Use the stripper to cut the insulation a ¼ to ½ to another insulation cut. Now take a sharp blade and cut the short insulation tube length wise and remove it, laving a clear length of bare wire.

What does it mean when copper wire turns black?

Heated copper metal reacts with oxygen to form the black copper oxide. The copper oxide can then react with the hydrogen gas to form the copper metal and water. When the funnel is removed from the hydrogen stream, the copper was still be warm enough to be oxidized by the air again.

How do you remove lacquer from copper wire?

Method 2: Acetone Nail Polish Remover
  1. Dip a cloth in acetone nail polish remover.
  2. Rub the copper piece until all lacquer is gone.
  3. Wash thoroughly in hot, soapy water.
  4. Dry completely with a soft cloth.
  5. Buff with a second dry cloth, using circular motions.
  6. Clean and polish the copper as needed.

Where can you find a lot of copper?

However, it’s a lot easier to find if you know where to look—so here are the top five places to find scrap copper.
  • Construction and Demolition Sites.
  • Home Plumbing and Kitchen Copper.
  • Electronics.
  • Home Appliances (Especially the Old Ones!)
  • Copper Roofing.

How much is scrap metal worth per pound today?

How much is scrap metal actually worth? Currently the closest scrap yard to me pays $195 per ton, or per 2,000 pounds for ferrous metals. This breaks down to approximately $10 per 100 pounds of metal. The price that scrap yards pay fluctuates with worldwide supply and demand and can change daily.

What happens if you nick a wire?

If the wire is nicked, one of two things may happen: If the nick is deep enough, the wire will overheat at the nicked point. This overheating is not detected by the fuse or circuit breaker and the result is an electrical fire.

How much insulation do I need to strip wire?

If you going to wrap the electrical wire around the terminal screw on the electrical receptacle (or a light switch terminal) you need to strip back a bit more than 1/2-inch in order to have enough copper to go around the screw leaving no insulation under the screw head when it is tightened.

Why must the plastic from the ends of the wire be cut off?

Modern wires most often use some sort of plastic coating for most wire sizes. To connect to the ends of insulated wire, you must remove a bit of insulation from end. This is called stripping the wire and should be done carefully to avoid cutting through the wire or slipping and cutting your hand.

How do you remove plastic coating?

Dip the corner of a rag into rubbing alcohol. Rub the surface of the metal with the alcohol to remove plastic that is stubbornly stuck to the metal. Use a firm rubbing motion to remove the plastic wrap residue from the metal surface.

What is number 1 Bare Bright copper?

No. 1 Bare Bright Copper Wire shall consist of bare, uncoated, unalloyed copper wire that is larger than 16 gauge. It refers to wires only, and copper pipes are not allowed. Also, green wire is not allowed in this category. 1 Bare Bright Copper Wire is one of the most valuable and highly paid grade of copper scrap.

How much is a copper wire worth?

Scrap Metal Prices *See disclaimer for additional costs*
Non-Ferrous Scrap Metal Market Price Your Price *
Scrap Bare Bright Copper $2.45 lb. $2.30 lb.
Scrap #1 Copper $2.49 lb. $2.20 lb.
Scrap #2 Copper $2.30 lb. $2.03 lb.
Scrap insul Hvy #1 copper Wire 85% Recovery $1.73 lb. $1.45 lb.

What does bare bright wire look like?

Bare Bright Copper

Also referred to asbright & shiny copper,” it is the most valuable and high-paying grade around. It refers exclusively to bare, uncoated and unalloyed wire or cable – no thinner than 16 gauge in thickness – which is of #1 copper quality.

What is the price of dirty copper?

Current Prices
STEEL Prices Per Pound
Dirty/Irony Aluminum $0.06
Aluminum/CU Rads $0.82
Wheel Clean $0.45
Wheel Dirty $0.45

  • 12
  • 39
  • 39
  • 39
  • 24
  • 27
  • 27
  • 38
  • 33
  • 18