Register Now

Login

Lost Password

Lost your password? Please enter your email address. You will receive a link and will create a new password via email.

Is Fusion Pro grout cement based?

Rate this Question and Answer

Asked by: Jonathan Holmes

Is Fusion Pro grout cement based?

Is Fusion Pro grout cement based? Answer: Fusion Pro is an advanced, proprietary acrylic plus silicone resin that cures as hard as cement grout. This patented formula combines the best features of cement and epoxy grouts into a single product. It is not a urethane and its performance is far superior to typical pre-mix grouts.

Does Fusion Pro grout contain cement? Fusion Pro Single Component Grout offers unsurpassed stain resistance, ultimate color consistency, and is easy to spread and clean. However, is not cement, epoxy or urethane-based. It’s a unique, patented, single component grout in a class by itself.

Is my grout cement or non cement? Traditional grout is made from a cement based mix. It’s not waterproof and actually absorbs water when it becomes wet. It also absorbs stains easily, as anyone who has scrubbed grout will attest to. Epoxy grout on the other hand, is made of epoxy resins combined with a filler powder.

Can I use grout as cement? Cement-based grout products are thinner than mortar and building cement, allowing it to flow better into cracks and other areas. It works well, but one of its biggest characteristics, and also its major drawback, is the porous nature of cement-based grout products. Cement-based products are also not waterproof.

Is Fusion Pro grout cement based? – Related Questions

Does Fusion Pro grout have sand in it?

Fusion Pro Single Component Grout is a professional grade, single component sanded grout. Fusion Pro requires no mixing and is ready to use on ceramic, porcelain, glass tiles and polished natural stone. It is suitable for exterior and interior wall and floor use.

Should I seal Fusion Pro grout?

Fusion Pro grout is a stain resistant grout. Sealing is not necessary. If sealing of the tile is necessary, use a water based sealer like AquaMix Sealer’s Choice Gold and wipe off excess on grout joints.

Is Fusion Pro grout good for showers?

Fusion Pro is guaranteed to be stain proof and color perfect with no variations from bucket to bucket. This is a ready-to-use grout that is easy to spread and clean. It can be used indoors or outdoors and even in wet areas like showers.

Which is better white cement or grout?

Unlike cement grout, which is made from a cementitious powder mix, epoxy grout is made from epoxy resins and a filler powder. The grout is extremely durable and almost completely stainproof. Epoxy thinsets offer greater bond strength and chemical resistance than cementitious grouts.

Can I use silicone instead of grout?

Silicone is advantageous to fill gaps over grout because it ensures watertight sealing. The sealing is so secure that it’s airtight as well! As a result, no bacteria can enter between the tile gaps. Grouts mixed with latex are waterproof.

What is the best waterproof grout?

Epoxy grout is water resistant and made from resins and fillers that help it work like a sealing adhesive. Epoxy grout is a better choice for showers, kitchen, bathrooms, and other damp areas because it is stain resistant and requires no sealing, unlike cement-based grout.

Can I use cement instead of mortar?

Though both mortar and concrete are widely used building materials, they cannot be substituted for each other without compromising the integrity of a build.

Is grout waterproof?

Contrary to popular belief, ceramic tile and grout, by themselves are not waterproof. Water can penetrate through cement-based grout and work its way through the substrate. To prevent water damage, you must install a waterproof membrane just below the tile bonding mortar as close to the tile as possible.

Is Fusion Pro waterproof?

Question: Are there any special installation instructions for installing Fusion Pro in a shower? Answer: Yes. As you are grouting the shower walls, be sure not to allow wash water to saturate the floor. Fusion Pro cures by evaporation and the introduction of additional water may not allow it to fully cure.

Is Fusion Pro grout an epoxy?

Answer: Fusion Pro is an advanced, proprietary acrylic plus silicone resin that cures as hard as cement grout. This patented formula combines the best features of cement and epoxy grouts into a single product. It is not a urethane and its performance is far superior to typical pre-mix grouts.

Does Fusion Pro grout go bad?

Bad Grout. Generally, powdered grouts expire after one year, while sealed epoxy grouts have can be stored indefinitely as long as they are not exposed to freezing temperatures. If your grout powder has clumps or small, hard lumps in it, the powder has likely been exposed to water or humidity and should not be used.

How long does it take Fusion Pro grout to cure?

Curing of Product

Allow 24 hrs until light traffic, and 3 days at 70° F (21° C) and 50% relative humidity before intermittent water exposure. Lower temperatures and higher humidity will slow the cure times. Covering Fusion Pro immediately after grouting will extend the cure time.

What kind of grout does not need to be sealed?

The only type of grout that doesn’t need sealer is epoxy, which is inherently pre-sealed.

Is Fusion Pro grout water resistant?

Is Fusion Pro waterproof? Answer: No. Fusion Pro is only recommended for use in intermittently wet environments such as showers.

Can I add water to Fusion Pro grout?

For additional questions or help, or call CUSTOM Technical Services at 800-282-8786. Because Fusion Pro® Single Component® Grout cures by evaporation, installing Fusion Pro is different than other types of grout. Do not add water to the grout.

Can I use unsanded grout in shower?

While you can use either sanded grout or unsanded grout for vertical tile such as bathroom or shower walls, unsanded grout provides a better working material. It sticks better to vertical surfaces with less of the slump associated with sanded grout.

Can we use white cement instead of grout?

Yes, most people use cement grout in tile work, but it is not the right option. They prefer cement-based grout products because of their thinner properties compared to the mortar and building cement. This feature makes it possible for this regular grout to flow better into cracks and any other area.

What is the strongest grout?

Epoxy Grout: Epoxy grout is considered by many in the industry to be a superior choice for any kind of tile project. Epoxy grout is durable, doesn’t need to be sealed, is stain and chemical resistant, and can withstand high traffic and moist areas. This makes it particularly good for indoor and outdoor use.

Is it better to grout or silicone?

Caulk performs well in angled seams.

Grout is generally the best choice for filling joints between tiles in showers or elsewhere. Grout in these particular seams is more likely to crack due to settling. Some tile setters fill these seams with matching color caulk because it’s more flexible should movement occur.

Is grout better than silicone?

The first majorly noticeable advantage that grout has over silicone is how easy it is to use. Because of its paste-like form, it’s easier to get to fit into tighter spaces and easy to wipe away any excess to ensure an even fill. Beyond that, it’s a little more porous than silicone, even the waterproof forms.

What is the best color grout to use in a bathroom?

Selecting neutral grout is often the safest choice for many bathrooms. Instead of selecting classic white or a bold blue, opting for tans, beiges, grays, or creams will add a hint of color without going overboard.

Asked by: Jonathan Holmes

Is Fusion Pro grout cement based?

Asked by: Jonathan Holmes

Is Fusion Pro grout cement based?