Register Now


Lost Password

Lost your password? Please enter your email address. You will receive a link and will create a new password via email.

What is a stopcock valve?

Rate this Question and Answer
Asked By: Marylou Larrino | Last Updated: 9th April, 2020
A stopcock is a form of valve used to control the flow of a liquid or gas. The term is not precise and is applied to many different types of valve. The only consistent attribute is that the valve is designed to completely stop the flow when closed fully.

Also to know is, what is a stopcock used for?

A stopcock is a valve, or a kind of tap, used to restrict or stop the flow of water through a mains water inlet pipe. They are also known as stop valves and stop taps. Stopcocks are used to prevent the flow of water into a domestic water system while carrying out maintenance, such as replacing a bathroom tap.

Similarly, how do I find the stopcock in my house? In most houses the stopcock is located under the kitchen sink. To turn off the stopcock simply turn the valve clockwise to turn off the water supply. In some houses there may also be a stopcock outside the house – look for a metal plate with the words “Water” or sometimes just a “W” on it.

Consequently, what type of valve is a stopcock?

An outside stopcock is a form of inline valve that works by rotating a stop or a plug within the chamber to stop the flow of water.

What is the difference between a gate valve and a stopcock?

A stopcock has a washer and used for high pressure stuff like mains. Gate valve is a wedge shaped gate which slides up and down bit like a locke gate on the canel.

Why is it called a stopcock?

A stopcock is a form of valve used to control the flow of a liquid or gas. The term is not precise and is applied to many different types of valve. The only consistent attribute is that the valve is designed to completely stop the flow when closed fully.

What is a three way stopcock?

It provides 3way flow (from inlet to outlet, inlet to side-port or side port to outlet) by use of the handle on the top of the stopcock to open and close lines. The device can also be used to reduce to lines down to one, for drugs/drug infusion purposes and for the attachment of extension lines.

How do you turn off water supply?

The shutoff valve for your home’s water main is likely located in the basement, near your water meter or wherever the local water supply enters your home. Generally speaking, it will be on the wall that faces the street. If this shutoff valve is tap- or knob-style, turn it clockwise (to the right), to turn it off.

Is it a legal requirement to have an internal stop tap?

It’s a legal requirement of the water regulations. External stop taps are used for turning off the water during a water leak or if you’re unable to find or operate your internal stop tap.

What is a stopcock in medical terms?

stopcock. [stop´kok] a valve that regulates the flow of fluid through a tube.

Where is the stop tap?

In most properties the stop tap is located inside, close to where the water pipe enters the building. The location can vary but they can usually be found: Under a kitchen sink. Kitchen cupboard.

Who is responsible for stopcock?

You may also need to turn off the water supply if you’re having building or plumbing work done. Typically, a property will have an inside stop tap that is the responsibility of the owner or landlord and an outside stop tap. South Staffs Water is responsible for stop taps located outside the boundary of a property.

How do you use a gate valve?

Operation of a gate valve is performed doing an either clockwise to close (CTC) or clockwise to open (CTO) rotating motion of the stem. When operating the valve stem, the gate moves up- or downwards on the threaded part of the stem. Gate valves are often used when minimum pressure loss and a free bore is needed.

What is a ballcock in a toilet?

A ballcock (also balltap or float valve) is a mechanism or machine for filling water tanks, such as those found in flush toilets, while avoiding overflow and (in the event of low water pressure) backflow. The float is often ball-shaped, hence the name ballcock.

How does a ball valve work?

The ball valve turns to the closed position when the port becomes perpendicular, blocking the flow path and preventing any substances to continue moving through. While most standard ball valves are designed with special stop measures that permit only a 90 degree rotation, there are a few that offer a full 360 degrees.

How much pressure can a ball valve handle?

working pressure for the high pressure ball valves is 7500 psi, and depends on the structure, sizes and sealing materials, the max. working pressure of high pressure ball valves can be up to 15000 psi.

Where is the mains water supply?

Typically, it will be located on the perimeter of the house, since that is where the water first enters your house. Also, stay on the side of the house that is facing the street. Your water main begins at the street and heads in a straight line to your home.

Where is my water stop tap internal?

Inside stop taps are normally under the kitchen sink or in the downstairs loo. You may find it in a garage or a utility room. If you can’t find it, check with your neighbours – they’re normally in the same place if your properties are similar. Your stop tap may be next to your meter, if this is fitted inside.

What is a stop tap?

A stop tap is used to regulate or control the flow of mains water in both residential and commercial buildings and it is very important that you know where it is in case of flooding. They are usually found inside homes under a kitchen or utility room sink.

How does a sure stop valve work?

Surestop is a unique and innovative Stopcock range, focused around protecting properties from the risk of water damage. With a simple flick of a switch, Surestop Stopcocks will completely STOP the water supply – without the use of batteries or electrics.

Where is my mains water tap?

Your water main is usually located near your water meter, outside at the front of your house, near the boundary of your home, sometimes in the close vicinity to a garden tap. Depending on how old your house is, it may have a knob or a nut for turning – turn it clockwise, or to your right, to turn the water off.

Where is my cold water cistern?

The system consists of a cold water tank (or cistern) normally in your loft & a hot water tank (or cylinder) normally in your airing cupboard. It’s called a low pressure gravity system because the water is kept under pressure via the gravity-fed water delivered from the cistern.

  • 12
  • 39
  • 39
  • 39
  • 24
  • 16
  • 30
  • 22
  • 23
  • 39