Register Now


Lost Password

Lost your password? Please enter your email address. You will receive a link and will create a new password via email.

What is the difference between 4a 4h and 4l?

Rate this Question and Answer
Asked By: Shakir Josebe | Last Updated: 12th June, 2020
4A has a differential between the front and rear output in the transfer case, 4H does not. 4A is like an all wheel drive and can be used on dry non slippery surface like dry pavement, 4H locks the front and rear output together, using it on non slippery surface put’s a lot of strain on the drive train and steering.

Also know, what does 2h 4a 4h 4l mean?

In 2H (two-wheel drive, high range) two wheels, usually the rear, are driving your vehicle. You use 2H for normal road driving. In 4H (four-wheel drive, high range) all four wheels are driving your vehicle. In 4L (four-wheel drive, low range), all four wheels are driving your vehicle and a low gear ratio is being used.

Also Know, is it OK to drive in 4a? Yes, it’s fine to run in 4A. 2X is better for everyday driving because your front hubs are not turning like they are when in 4A. 4A is fine for every day driving. 4H and/or 4L is only for offroad and slippery road conditions.

Also to know, what is 4a drive mode?

According to Ford, Quote: 4A (AUTO): In this mode, electronic control four-wheel-drive power is delivered to all four wheels, as required, for increased traction. For all on-road conditions, including dry road surfaces, wet pavement, snow or gravel.

What does 4 High and 4 Low mean?

Without an Auto setting, 4WD High is what you’d use in any situation that’s low-traction but relatively high-speed—a dirt road or snowy paved road. 4WD Low is strictly for slow off-roading or places where torque multiplication would really help you out (like deep sand).

Is it bad to drive in 4 high?

The facts about 4High: 4High allows your vehicle to drive at fast speeds (manufacturers often recommend no faster than 55mph) while power is sent to all four wheels providing your car with better traction than 2-wheel drive. When using 4-Low, it’s important to keep your vehicle at slow speeds.

Is it OK to drive in 4h?

Four-High (4H)

In high-range four-wheel drive, you can travel at all normal speeds. Engage this setting when you’re on the highway and roads are sketchy – wet, snowy, icy. It’s also good for level, loose-gravel roads, packed sand or mud.

Should I drive in 2h or 4a?

2H (4X2) – For general on-road driving, this mode provides optimal smoothness and fuel economy at high speeds. 4A in Normal and Sport is appropriate for all on-road driving conditions, including, dry road surfaces. 4A in Snow/Wet is appropriate for slippery on-road conditions such as snow and ice covered roads.

Can you switch from 2h to 4h while driving?

you can shift from 2h to 4h on the fly by turning that 4wd switch. in 4h you can pull it out and lock your rear diff because you have the fx4 with the electronic locking diff. only use the diff lock in extreme situation when your only driving straight.

When should I use 4h?

4H is your go-to setting for driving at normal speeds (30 to 50 MPH), but with additional traction. Use this setting when driving on hard-packed sand, ice or snow covered roads, and dirt roads.

Should I use 4h in rain?

Driving in the 4H and 4L positions on hard-surfaced roads will cause increased tire wear and damage to the drive-line components. So no, routine driving in the rain, on pavement, in 4H is not a good idea now apparently.

What happens if you drive in 4 wheel drive on dry pavement?

Driving a part-time 4WD system on dry pavement can break the front axles, shear the differential gears and even break apart the differential case. As soon as you hit dry pavement, shift back into 2WD.

What does 4a mean on a truck?

automatic all-wheel drive

Why do Fords still have locking hubs?

ELI5: Why do Ford trucks have manual hubs, but nobody else’s do? They actually make conversion hubs so you can retrofit manual locking hubs to these trucks for an MPG increase. They are manual rather than auto locking hubs, because manual are much more reliable, and you can engage them while stopped.

What does 4a mean in my f150?

(4A (4X4 AUTO) Provides electronic control four-wheel. drive with power delivered to the front and. rear wheels, as required, for increased. traction.

How fast can I drive my f150 in 4 wheel drive?

Re: how fast can you go in 4×4

55 mph (88 km/h). Note: Do not perform this operation if the rear wheels are slipping. normal. However, personally if you can drive faster then 55MPH, you do not need to be in four wheel drive mode.

How does electronic 4wd work?

When 4WD is engaged, the gears mesh together causing a chain to move a gear that’s connected to the front drive shaft. The front drive shaft starts spinning at the same speed as the rear drive shaft and delivers torque to the front differential, which then transmits torque to the front wheels. Boom.

How do Ford auto locking hubs work?

F150 Auto locking hubs

Guys, Ford autolocking hubs work by mechanical torque. When the transfer case is engaged, the torque on the front axle twists the internal componants of the hub lockinging them into place,. (sort of like twisting on a bottle cap).

How does Ford 4wd work?

Ford four-wheel-drive (4WD) systems allow a vehicle’s engine to send power to all four wheels, instead of the front wheels or rear wheels only. Many 4WD vehicles can be switched back and forth between rear-wheel drive using a switch or a gear lever in the cab.

How does 4×4 work on Ford f150?

Ford F-150: 4WD General Information. As soon as you switch into 4WD, the front axles lock electronically and they will begin to receive power. This benefits you because now not only do you have two extra tires helping you move, but also those two extra tires are receiving the engine weight to help them gain traction.

What does sport mode do in 2018 f 150?

Sport mode reduces the frequency of having to step on the gas pedal to reach peak torque – resulting in quicker acceleration with less pedal travel. Sport mode is standard with every F150 engine and can be activated in two-wheel drive, four-wheel-drive automatic and four-wheel-drive high settings.

How fast can you go in 4 wheel drive low?


  • 12
  • 39
  • 39
  • 39
  • 24
  • 33
  • 30
  • 26
  • 38
  • 24