Register Now

Login

Lost Password

Lost your password? Please enter your email address. You will receive a link and will create a new password via email.

What size is 3×2 timber in MM?

Rate this Question and Answer
Asked By: Taufik Valeiro | Last Updated: 17th April, 2020
Softwoods
Softwood Dimensional Lumber Sizes
Nominal Actual
2 × 3 1½″ × 2½″ (38×64 mm)
2 × 4 1½″ × 3½″ (38×89 mm)
2 × 6 1½″ × 5½″ (38×140 mm)





Keeping this in consideration, what size is 3×2 timber?

Normal lengths are 3.0, 3.6, 4.2 & 4.8 metres; We keep a good selection of larger sized timbers in stock, up to 9×2″ / 47×225mm in the Easi-Edge, and 12×2″ / 47×300mm in an Unsorted Whitewood Rough-Sawn Carcassing timber; Longer lengths – 5.4 & 6.0 metres are available in the Rough-Sawn timber.

Beside above, what size is 2×4 in MM? Lumber Dimensions

Nominal Actual Actual – Metric
2″ x 2″ 1-1/2″ x 1-1/2″ 38 x 38 mm
2″ x 4″ 1-1/2″ x 3-1/2″ 38 x 89 mm
2″ x 6″ 1-1/2″ x 5-1/2″ 38 x 140 mm
2″ x 8″ 1-1/2″ x 7-1/4″ 38 x 184 mm

Also to know, what are the actual dimensions of a 2×3?

Nominal vs. Actual Measurements of Dimension Lumber

Nominal Size Actual Size
2 x 2 1 1/2 x 1 1/2 inches (38 x 38 mm)
2 x 3 1 1/2 x 2 1/2 inches (38 x 64 mm)
2 x 4 1 1/2 x 3 1/2 inches (38 x 89 mm)
2 x 6 1 1/2 x 5 1/2 inches (38 x 140 mm)

What is a 2×4 called in metric?

If you go to a lumberyard, you buy 48×98 as everything is measured in metric, but in the daily speach most people still use the term 2×4, 2×8 aso. The Inch measurement is in use as long as we speak about size on TV(40″) and cartyres (15″).

What size is 6×2 timber?

Normal lengths are 3.0, 3.6, 4.2 & 4.8 metres; We keep a good selection of larger sized timbers in stock, up to 9×2″ / 47×225mm in the Easi-Edge, and 12×2″ / 47×300mm in an Unsorted Whitewood Rough-Sawn Carcassing timber; Longer lengths – 5.4 & 6.0 metres are available in the Rough-Sawn timber – however, we can also

What are standard wood sizes?

It is thus possible to find 2×4s that are four, eight, and twelve feet in length. In Canada and the United States, the standard lengths of lumber are 6, 8, 10, 12, 14, 16, 18, 20, 22 and 24 feet (1.83, 2.44, 3.05, 3.66, 4.27, 4.88, 5.49, 6.10, 6.71 and 7.32 meters).

What size is 2 by 1 timber?

Softwoods
Softwood Dimensional Lumber Sizes
Nominal Actual
1 × 2 ¾″ × 1½″ (19×38 mm)
1 × 3 ¾″ × 2½″ (19×64 mm)
1 × 4 ¾″ × 3½″ (19×89 mm)

What is the common size of sawn timber?

Dimensions mean nominal sizes with the moisture content of the sawn timber at 20%. The most common lengths vary between 2.7 m and 5.4 m in steps of 300 mm.

How wide is a 4×4 post?

The lumber industry defines standard wood post sizes as 4×4 or 6×6. The outside dimensions of the standard 4×4 measure 3-1/2″ x 3-1/2″, and the outside dimensions of the standard 6×6 measure 5-1/2″ x 5-1/2″.

What is difference between c16 and c24 timber?

C24 graded premium structural timber offers greater strength than C16 timber, making it a more demanding grade that can handle higher loads and wider spans. It is the better-quality structural option because it can take up to 50% longer for these timbers to grow, meaning that they have more growth rings.

What is 4×4 wood in MM?

However, there is a difference between the nominal size (what the lumber is referred to) and the actual size.



North American Standard 4-by Lumber.
Nominal Size (inches) Actual Size (inches) Actual Size (mm)
4 x 4 3 1/2 x 3 1/2 89 x 89
4 x 6 3 1/2 x 5 1/2 89 x 140
4 x 8 3 1/2 x 7 1/4 89 x 184
4 x 10 3 1/2 x 9 1/4 89 x 235

What is 6×2 timber?

6×2 (47×150) Timber. Treated Graded Timber ,6×2 most commonly used in the construction of floors and roof applications but very adaptable and can be used in many other areas.

What size is a 4×4 picture?

40×40 mm

How do you measure wood?

Board Foot: Rough sawn lumber is usually sold by the “board foot” (bd. ft.). A board foot is equal to a piece of wood 12 inches long x 12 inches wide and 1 inch thick, or 144 cubic inches. To figure the board foot measurement of a piece of wood, multiply the length x width x thickness in inches, then divide by 144.

What is actual size?

The actual size refers to the exact measurements of your air filter, and the true dimensions when you measure the length, width, and depth (thickness). Actual size typically includes a fraction number within the dimensions – for example: 19 1/2″ x 19 1/2″ x 3/4″.

What is actual size of 1×6?

A 1×6, for example, actually measures 3/4″ x 5 1/2″.

How do you read dimensions?

For example, a window that is 24 inches wide by 30 inches tall would be written as 24″ X 30″. In the manufacturing industry, this standard window size is referred to as a 2030 or 2 feet by 3 feet. In a rectangular swimming pool, the dimension might read 16′ X 30′ X 9′ or 16 feet wide by 30 feet long and 9 feet deep.

Is a 4×4 really 4 inches?

Believe it or not, there actually is some rhyme and reason for why the actual measurements of dimensional lumber don’t match their names.



Actual Dimensions and Nominal Dimensions.
Nominal Measurement Actual (inches) Actual (mm)
2 x 12 1-1/2 x 11-1/4 38 x 286
4 x 4 3-1/2 x 3-1/2 89 x 89
4 x 6 3-1/2 x 5-1/2 89 x 140

What are the actual dimensions of a 1×4?

1x Board Sizes

These boards lose 1/4 inch in thickness and 1/2 inch in width before leaving the mill. That means a 1 x 4 board is actually 3/4 inches by 3 1/2 inches.

Why are wood sizes not the actual size?

Maybe you’ve noticed that lumber sizes are often misleading. The “nominal” cross-section dimensions of a piece of lumber, such as 2 X 4 or 1 X 6, are always somewhat larger than the actual, or dressed, dimensions. The reason is that dressed lumber has been surfaced or planed smooth on four sides (called S4S).

How wide is a 2 by 4?

A piece of surfaced (sanded smooth) 2×4 lumber actually measures 1½ inches thick and 3½ inches wide. In rough-cut condition, a 2×4 is slightly less than 2 inches thick and approximately 4 inches wide. When wood is milled from a rough to a smooth surface, it loses about ¼-inch from each of its four sides.

  • 12
  • 39
  • 39
  • 39
  • 24
  • 31
  • 33
  • 35
  • 36
  • 29