Register Now

Login

Lost Password

Lost your password? Please enter your email address. You will receive a link and will create a new password via email.

Why does my Whirlpool Cabrio keeps saying UL?

Rate this Question and Answer
Asked By: Parwinder Janaev | Last Updated: 16th April, 2020
Whirlpool Cabrio Washer Error UL. The Cabrio Washer UL error code stands for un-balanced or off-balanced load which means the control has recognized the the tub is off balance during the spin cycle.





Just so, why does my washing machine keeps unbalancing?

When a washing machine becomes unbalanced, it may start to vibrate excessively. The vibrations can quickly cause collateral damage, so it’s a problem that needs immediate attention. You can often fix the problem by redistributing the load — often a single heavy item in a light load can unbalance the drum.

Beside above, what does the code ol mean on a Cabrio washer? Whirlpool Cabrio Washer Error OL. The Cabrio Washer OL error code stands for overloaded which means the control has recognized that the load in the tub is to much for the machine to handle or there is friction on the drive system not allowing the basket to disengage.

Also asked, how do I reset my Whirlpool Cabrio washer?

How To Reset Whirlpool Cabrio Washer:

  1. Turn the washer off.
  2. Set the mode selector dial to NORMAL.
  3. Turn the dial counter clockwise ONE click (LEFT), clockwise THREE clicks (RIGHT), counter clockwise ONE click (LEFT) then clockwise ONE click (RIGHT).
  4. Now press the start button.

What is UL on washer?

If uL (unbalanced load) appears in display, the load is out of balance. The washer is running a load-balance correction routine. Allow the washer to continue. If the dial is flashing and the washer has stopped, redistribute the load, close the lid, and press START/PAUSE.

What does OB mean on a Whirlpool washer?

The “ob” Error Code means that the washer is off balance.

How do you balance a top loading washing machine drum?

Toploading washers automatically adjust to level. If something has shifted, you can relevel a toploading washer by tipping the washer forward, then placing it back on the floor. Front-loading washers level by turning a leg to raise or lower it.

How do you rebalance a washing machine?

If your washer is located on a pedestal, the problem can be amplified. Top-loading washers automatically adjust to level. If something has shifted, you can relevel a top-loading washer by tipping the washer forward, then placing it back on the floor. Front-loading washers level by turning a leg to raise or lower it.

Why does my washer keep saying UE?

Your appliance will display a UE code when it has detected an unbalanced load and has stopped the spin for safety reasons. With any washing machine, it is vital to ensure that the load is evenly balanced when using a spin cycle. Redistribute washing by adding or removing items to ensure a more balanced load.

Why does my top loading washing machine shake violently?

Shock Absorber

All front-load washing machines have shock absorbers that are used to dampen the tub movement in the spin cycle. When shock absorbers weaken or become damaged, unbalanced loads will cause the washer to shake or move and the machine will often make a loud banging sound during the spin cycle.

How long should a washing machine last?

The average life expectancy of a new washing machine is 11 years. Consumer Reports recommends replacing any appliance that’s more than eight years old, unless it’s a high-end model and has a particular appeal to you. Others suggest replacing any top-loading washer manufactured in 1999 or earlier.

What causes bearings to go in washing machine?

Both front and top load washers use bearings that will eventually become defective with use. Over time, water seeps through the seal and rusts the bearings. Rusted bearings are the main cause of the loud noise that you hear when the washer is spinning.

Is there a reset button on a Whirlpool Cabrio dryer?

If your Whirlpool dryer displays a “PF” error code, indicating a recent power failure, the dryer will need to be reset and restarted. This is done by pressing “Start” for a few seconds to restart the dryer. If the dryer does not restart automatically, select a new cycle and any options then press “Start” to begin.

How do you calibrate a Whirlpool Cabrio Platinum washer?

CABRIO WASHER CALIBRATION CYCLE
  1. Pick three buttons ( Do not use Power button) and within 8 seconds.
  2. Make sure the washer is in (Stand By Mode) which means the machine is plugged in and all the indicator lights are off.
  3. Press and Release the 1st selected button,
  4. Press and Release the 2nd selected button,

How do you reset the error code on a Whirlpool Cabrio washer?

How to Reset a Whirlpool Cabrio
  1. Touch any key on the display pad to clear the error code, if applicable, or press “Pause/Cancel.”
  2. Choose a new cycle and press “Start” to begin.
  3. Turn off and disconnect the Cabrio if the error or problem persists.
  4. Wait several minutes before restoring power.
  5. Contact Whirlpool for assistance if the unit will not reset.

Do Whirlpool washers have a reset button?

How do you reset a Whirlpool washing machine? Plug the washer back in and lift and lower the lid 6 times within a 12 second period. You have 30 seconds to start lifting and lowering the lid. The motor has now been reset and is ready for you to start a cycle.

How do you reset a Whirlpool washing machine?

Press the Start Stop button once. Rotate the dial until Rinse, Wash, and Stop light illuminate. Turn the washer off and unplug it for 10 seconds. Finally, turn on the washer and it should now be reset.

Why is my Cabrio washer not spinning?

If your washer doesn’t spin or pump water out but the motor is running, your washer probably has a frozen pump pulley. If so, you need to replace the pump. To check the pulley, remove the pump from the washer and try to rotate the pulley manually. If it doesn’t turn freely–if it’s frozen or stiff–replace it.

What does F mean on Whirlpool washer?

The “F” error code indicates the washing machine system or “Fault”. Ehe “E” error is indicating the part in your washer that causing the issue or “Error”. As a general rule, these “F” error codes mean the following… – Whirlpool Duet Washing Machine F5 error code indicates door lock and door switch issues.

What does unbalanced load mean?

An unbalanced load occurs when there is significantly more power drawn on one side of the panel than the other. This can lead to overheating of electrical components and possibly overloading the panel.

Why does my washing machine drum make a banging noise?

The most common reason for a noisy washing machine is that you’ve overloaded the tub or that the clothes in the tub are unevenly distributed. This causes the inner tub of the washing machine to spin unevenly, often hitting against the outer tub and creating the banging noise.

  • 12
  • 39
  • 39
  • 39
  • 24
  • 37
  • 35
  • 10
  • 22
  • 38